Mixer Mode (FX Tab)

The Effects in FX MODE are all Send/Return Effects. Each Track Channel can send to these Effects in varying amounts.

BoomRoom Reverb

BoomRoom Reverb is a high-quality Reverb control.

Power toggles this Effect ON/OFF.

Return tweaks the amount returned to the mix.

PREDELAY controls dictate the amount of time between the original sound and the first sonic reverberation.

Amount controls the amount of signal that passes through the predelay.

Mix controls the ratio of unaffected to affected signal.

Hi is the amount of higher frequencies that are included in the signal before applying the reverb.

Lo is the amount of lower frequencies that are included in the signal before applying the reverb.

The Boom knob boosts the bass of the signal and changes the size of the "room" of the reverb. The BoomRoom icon changes in size when you adjust the Boom knob. The icon also emits sound waves when playing your track.

Ekko

Ekko is a Tempo-Syncable Dampening Delay.

Syncing the delay rate causes the delay to sound in time with the session tempo. Adjust the Rate knob to make the delayed sound faster or slower. The display above the knob indicates the rate in seconds or tempo, which can be switched next to the knob.

FEEDBACK: Dial up the Feedback knob to hear the delay echoing beyond the original sound.

DAMPEN: Increasing the Dampen knob decreases the sound of the delay effect compared to the original device sound.

DRY/WET: The Dry/wet knob determines the amount of original sound you hear through the effect; the closer to Dry, the more intense the raw sound and the less audible the delay.

Whirl Chorus/Flanger

Whirl combines chorus and flanger elements in its controls to widen and intensify the sound.

Adjust the RATE (seconds/tempo) and AMOUNT of the DELAY and FEEDBACK applied.

Inter-App Effect

Inter-App Effect routes channels through a 3rd Party Audio Effect App on the device. Tap here to display a popover with inter-app effect choices. When an effect is routed the icon is displayed here.